Denver Roofing: Article About Understanding Vinyl Siding Installation
Hiring a Denver roofing company to install your new vinyl siding is a smart investment. Your home will have an enhanced curb appeal while possibly increasing the property value. As you watch the siding being added to the structure, it's important to know some of the steps that professionals take during this project. As a result, you'll be sure that items are being installed correctly and with precision.
The first feature that you should notice during a vinyl siding installation is the nails' orientations. The nail heads should be flush with the siding's surface. If you see nails that are angled into the surface, the siding isn't being installed with precision. Ideally, you can speak to the project site manager about these concerns. This supervisor can correct the issue before it becomes widespread.
These nails should be driven in equal intervals across the vinyl's surface. Centering the nails on the vinyl with 12 or 16 inches between them is common. Your installers will determine the best spacing based on the area's weather conditions. If you live in a particularly windy area, closer nail orientations are often called for. Any strong winds striking the building will be blocked with secure siding.
As you see one section being added beside another vinyl piece, don't be surprised by the spacing.
A roofing contractor from All Around roofing of Denver CO can answer any questions you have about insulation or flat roof systems.
Referred to as a gap, these spaces between vinyl sections should measure about 1/4 inch wide. Although these gaps are usually capped, it's important to know that they're present on the structure. As your home expands and contracts between hot and cold weather, those gaps prevent the siding from warping or bending. It needs enough room to move under weathering pressure.
Another gap feature on vinyl siding is between the nail head and wall surface. Professionals will drive the nails against the structure until they're about 1/16th of an inch away from the wall. This tiny gap allows for more expansion and contraction to occur. If siding has tight nails, it's bound to crack and warp over time. It will still fight off extreme temperatures and pests with the gaps in place.
Regardless of your local weather, every vinyl siding project should have the proper fasteners. Your installation professionals will use corrosion resistant nails that secure each siding section. Wet, hot or dry weather won't contribute to the fasteners' demise when they're sealed and coated at the manufacturer's facility. When it's installed correctly, the siding will remain tightly attached to the home over the next few decades.